GWA1201 – Connected Axial Two-Way Switch Module

Flush-mounting connected device, with front push-button with axial operation for commanding an On/Off or Timed On load via an output contact with potential. The device has two independent relays with a “logic” interlock, allowing it to work as a two-way switch (upstream from a junction) or an actuator (connecting one relay only) to control loads from 100 to 240V AC, 50/60 Hz. The relays are not managed independently, so it is not possible to connect two different loads to them.
The device can measure and communicate (via Zigbee) the approximate value of the power and energy consumed by the load connected to it.
The device is designed to power and manage the EGO SMART PLATE (GW16003SXX, GW16004SXX, GW16022SXX) that houses it. If used in combination with the EGO SMART PLATE, another Zigbee command (activated using the front push-button of the device when the dual or “SHIFT” function is enabled via the EGO SMART PLATE) can be sent. The device can be combined, and commanded via Zigbee, with all the connected Zigbee devices including the 4-command push-button panel (GWA1291).
It works as a Zigbee “router” – in other words, it forwards Zigbee messages to other devices.
It has 2 inputs (to which auxiliary axial commands, traditional push-buttons and one-way switches, sensors, etc. can be connected) for replicating the local command of the load connected to it, or for sending Zigbee commands and statuses.

Visit GEWISS S.p.A.