GWA1221 – Connected Axial Dimmer Module

Connected flush-mounting device with two front push-buttons with axial activation, for commanding and regulating incandescent, halogen, LED and fluorescent lamps (240V AC, 4-150W), and for loads controlled by electronic transformers (240V AC, 4-150VA). Trailing edge load control mode.
There are two axial push-buttons on the front of the device, for switching on and off (short press) and for regulating the brightness of the connected load (long press).
If used in combination with the EGO SMART PLATE, two additional ZigBee commands (activated using the front push-buttons of the device when the dual or “SHIFT” function is enabled via the EGO SMART PLATE) can be sent.
The device can be combined, and commanded via ZigBee, with all the connected ZigBee devices including the 4-command push-button panel (GWA1291).
It works as a ZigBee “router” – in other words, it forwards ZigBee messages to other devices.
It has 2 inputs (to which auxiliary axial commands, traditional push-buttons and one way switches, sensors, etc. can be connected) for replicating the local command and regulation of the load connected to it, or for sending ZigBee commands and statuses.

Visit GEWISS S.p.A.